Categories
music technology synth

Roland JX-10 virtual controller for Logic Pro

The JX-10 is my favorite analog synth for pads and synthstrings and it also does a good job for leads and basses. The thing is (or was) that it was almost impossible to edit the sounds in realtime without the PG-800 programmer. The only way was to look up one parameter at a time in the menu and then turn the Alpha-dial wheel a thousand times to get the sound where you wanted it to be, a lot of button pushing and wheel turning! The MIDI implementation was a disaster but luckily Colin Fraser rewrote the  sysex code for the JX-10, so now it can communicate with MIDI editors/controllers, DAW’s, etc… I still got a copy of Emagic SoundDiver, and I was able to program the JX-10 using a modded JX-8P preset and MKS-70 preset, but it wasn’t really stable. Another downside was that it couldn’t be controlled in real-time in combination with Logic Pro, so I decided to give a try and build a JX-10 editor in Logic’s Environment. Last time I used the Environment was almost 15 years ago, my programming skills are very limited, so don’t expect the editor to be a work of art! I only used faders, no knobs for switching the waveforms, there’s no reading of value’s in the editor, but luckily the JX-10 display tells you what you are doing.

In fact, I build 2 versions of the editor, one that only reacts when moving the virtual faders in the Environment and one that can be controlled by a hardware MIDI controller, in my case the assignable control faders on the Kurzweil K2500. With my limited skills I couldn’t combine those two into one version without very noticeable artifacts (sloppy timing when using more than one fader at one), but you can combine them both. That’s how I use it, because I can only automate 32 parameters of the virtual controller with the K2500, the ones that aren’t controlled by the K2500, can be controlled in Logic by hand that way . Now I can record all changes made in the sound into Logic in real-time, just like you would do when using a plug-in, but now it sounds good too 😉

You can look at the JX-10 as two JX-8P’s in one box, it has literally two JX-8P boards in it. Another thing they didn’t get right at Roland at the time is the way the JX-10 saves it’s sounds. One sound (called patch) build out of 2 tones (1 tone=1 JX-8P). Those tones can be used in more than one sound (patch). So if you save a tone in one patch, other patches using that tone will also change….. If you got the M-64C memory cartridge you can do sysex dumps, so that would be a wise thing to do before you starts messing up great patches. Being two 8p’s, you can only edit one tone at the time,  not a big thing if you’re only editing a sound, but if you’re recording the sysex changes, it would have been way cooler if it could handle both tones at the same time. But still better than turning the Alpha-dial and not recording sysex at all!

I really like the sound of the JX-10, while creating the editor I finally heard the full sonic power of the JX-10. Sometimes you read that people find the JX too slow for basses, but with a few tweaks in the editor I got punchy basses with a lot of weight. It’s so much easier now to get the sounds you want.

I’d be happy to share the JX-10 environment with you. I think you can also use it with the MKS-70 module version of the JX-10 and if you can change sysex code yourself, you can also use the JX-8P (change the 3rd hex nr “36” into “35”, change sysex view into hex). The JX-10 MUST be upgraded with the  rewritten sysex code, version 2.3 (latest version) in order to work.

If you want to program your MIDI controller, please check the “JX-10 CC info” file for the CC numbers.

If you’re a Kurzweil K2500 user you can load the “MIDI_SET.K25” master file into your machine, then all 4 fader banks are automatically ajusted with correct MIDI channel and CC number settings.

Click HERE to download

5 replies on “Roland JX-10 virtual controller for Logic Pro”

Hi Rutger,
While looking for some info related to JX-10 I came accross your website…accidently really.
I like my JX-10 sound and I’m not happy about the programming the synth. PG-800 seems to be too expensive and in fact I should start from repleacing the Eprom inside the syth (thanks to Colin) with a new mainframe. However, you created the Logic Pro controller which does the same job as PG-800, but as I see you use the Mac for your sequencer and I’m usnig an old Logic Platinum on PC. So I wander whether I will be able to use your controller. Thanks in advance for any explanation.

Best regards,
Darek
Leidschendam

Hi Darek,
Sorry for my very late response, your mail slipped through….
I’m afraid that there’s no way to export environment layers, I tried to do so, but without success. Do you use Emagic SoundDiver by any chance?

For your reference, Logic Environemtns can be exported, create a “Cleaned up” project file, with only the environment layers and objects you wish to export, and nothing else , save that, and share the project file. end user can then use import environment layers function in the options menu to import the desired layer into their project . Just passing through on a google hunt for an old reference library of logic layers …..

Leave a Reply to Darek Cancel reply

Your email address will not be published. Required fields are marked *